Functions - Breville Easy Air LAP158 Instruction Book

Functions

OPERATING YOUR AIR PURIFIER
1. Press the POWER button to turn on
and the POWER symbol light will
illuminate.
2. The air purifier will begin operation.
3. The air purifier will begin operation in the
last setting selected, including Night mode
and Timer.
4. To adjust how the air purifier operates, follow
the directions below.
• If the Wi-Fi has been activated prior to
resetting the filter, press and hold the
POWER button for 5 seconds again and the
Wi-Fi light will illuminate to indicate that Wi-
Fi has been
re-activated.
Microbe Shield /NIGHT MODE
TM
The Microbe Shield
TM
the same button on the control panel. Pressing
the Microbe Shield
will cycle through these two settings.
Microbe Shield
TM
• Press the Microbe Shield
button until the Microbe Shield
light illuminates to turn it on.
• Press the button repeatedly until the light
extinguishes to turn off this function.
and Night Modes utilise
/NIGHT MODE button
TM
/NIGHT MODE
TM
indicator
TM
Night Mode
• To turn on Night Mode, press the
Shield /NIGHT MODE button until the
TM
Night indicator light starts to blink.
• After 10 blinks, all indicator lights on
the control panel will turn off as the unit
enters night mode and the fan speed will
automatically change to Low.
• Press any button on the control panel to
re-engage the control panel and turn off
night mode. The Night indicator light will
extinguish.
FAN SPEED/TURBO MODE
NOTE
The air purifier will resume in the last
programmed setting once it has been turned
off, even if turned off at the power outlet. If the
last programmed setting was Night mode, once
turned on, the control panel will illuminate
with the Night indicator light blinking as a
reminder that Night mode has been set.
• Press the FAN SPEED button repeatedly
until the desired speed is illuminated on the
control panel.
• There are 4 fan speeds: Low, Medium, High
and Turbo.
• The purifier has reached Turbo mode when
all three lights are illuminated on the control
panel at the same time.
NOTE
When changing the fan speed, the unit may
take a few seconds to adjust.
Microbe
9