Prepare The Baby - Remove Clothing; Positioning The Baby - GE BiliSoft 2.0 Operation Manual

Prepare the Baby – Remove Clothing
Prior to positioning the baby on the pad it is important to remove all clothing but your baby's diaper.
The therapy is only effective if the baby's skin is exposed to the blue light. Clothing such as sleepers will
prevent the light from reaching the baby skin

Positioning the Baby

Regularly check that the patient is in the treatment area of the device.
1. Place the baby on the padded side of the flat cover. (The straps are on the bottom.)
Fiberoptic cable is at the baby's feet.
IMPORTANT: Be sure to position the baby to expose the most amount of their skin to the
pad light. Baby should wear diaper only.
PLACING BABY ON FLAT PAD COVER
FIBEROPTIC
CABLE
FIBEROPTIC
CABLE
A2-5