Attaching The Mounting Bracket - GE BiliSoft 2.0 Operation Manual

The BiliSoft 2.0 Phototherapy system Light Pad is placed under the patient. The pad can be placed
on top of a crib, bed or basinet, mattress and the patient is then placed on top of the light pad.
Alternatively, the Light Pad and the patient can be wrapped together using a blanket.
The Light Box can be placed on any of the following:

On the floor, on a table, or another stable, flat surface.

On Hospital Beds or Incubators equipped with an Ohmeda Medical Dovetail Rail.
(Optional - mounting brackets sold separately)

On Hospital Roll Stands equipped with an Ohmeda Medical Dovetail Rail.
(Optional - mounting brackets and stands sold separately)
The BiliSoft mounting bracket to allow use with an Ohmeda Medical Dovetail Rail is sold separately.
The bracket is attached to the Light Box using screws provided with the bracket. The Light Box has
four matching inserts on the bottom of the unit. The bracket can be positioned on the left or right
side of the unit. When installed, there may be a small amount of tilt to the bracket.
See the Optional Parts List in this manual for the bracket part number.

Attaching the Mounting Bracket

Mounting bracket, male (for dovetail rail
and mobile stand).
2-4
Mounting bracket,
female (for dovetail rail
and Giraffe Spot PT Lite
roll stand).
Mounting bracket, female (for
Ohmeda mobile stand).