Table of Contents
Advertisement
Quality
All EntelliGuard R circuit breakers have been designed and manufactured to ANSI standards. The design was
based on the original requirements of the legacy switchgear and breaker. The product is manufactured in
Burlington, Iowa; and is inspected using some of the same master gauges used on the legacy AK, AKR
breakers to confirm electrical and mechanical performance, including rejections-features.
Information Label
On the side wall of each circuit breaker there is a factory-assembled label that details all features included
on both the circuit breaker and on the trip unit.
Product and Catalog Serial Numbers
Product and catalog serial numbers should be kept handy when communicating about the circuit breaker.
Each circuit breaker has a unique serial number located on the left side (viewed from front) of the front
fascia.
Remove Circuit Breaker from Container
Inspect and Prepare
1. Inspect the shipping container for obvious signs of rough handling and/or external damage incurred
during transportation.
2. Record any observed damage for reporting to the carrier. Ensure all recorded reports and claims include
the order number and name plate information.
3. Remove the banding straps and lift the top cover.
4. Remove all packaging material.
5. Remove all product documentation and store properly.
6. Unscrew the mounting screws that fasten the circuit breaker to the bottom of the shipping pallet and
remove the circuit breaker.
7. Reverse the orientation of two shipping plates with flanges inward and reinstall on breaker. These
flanges will keep the breaker from resting on the rejection pins and centering guide pin whenever it is
placed on a flat surface.
Use Lifting Truck
1. Use a lifting truck for moving circuit breaker in order to avoid personal injury and damaging
the breaker.
2. Uses a proper overhead lifting device to mount the breaker into the switchgear, refer to Page 22.
3. Contact the nearest sales office for availability of a hoisting device.
EntelliGuard R Circuit Breaker Retrofill AKD-10 Installation Manual
15
DEH41550 R06
Advertisement
Table of Contents
