Table of Contents
Advertisement
Available languages
Available languages
GB
Starting/resuming operation
Press the start key (17). The automatic
lawn mower starts the set operating cycle
or resumes its previous activity without
interruption.
Cleaning/maintenance/
storage
Have any work that is not de-
scribed in these instructions
performed by an authorised cus-
tomer service centre. Only use
original parts.
Before any maintenance or clean-
ing work, switch off the device and
wait for the blade to come to a
standstill.
Wear gloves when handling the
blades.
General cleaning and mainte-
nance work
Never spray down the lawn
mower with water. There is a
risk of electric shock.
•
Keep the device clean. Use a brush
or cloth for cleaning, but do not use
any aggressive cleaning agents or sol-
vents.
•
Grease the wheels from time to time.
•
Check the covers and protective de-
vices for damage and correct fit. Re-
place these if necessary.
94
Replacing the
rechargeable battery
Switch off the device and wait
for the blades to come to a stop.
There is a risk of personal injury.
There is a risk of injury from
leaking battery fluid! In case of
contact with eyes or skin, rinse
the affected sites with water or
a neutralising agent and seek
medical attention.
1. Turn over the automatic lawn mower.
2. Open the battery compartment
(
31) by removing the 6 screws on
the underside of the device.
3. Remove the battery (21).
4. Insert the new rechargeable battery.
5. Re-connect the battery compartment.
Turning/replacing the
blades
The automatic lawn mower is equipped
with reversible blades. If the blades are
blunt on one side, they can be turned
over. If the blades are damaged or show
signs of imbalance, they need to be re-
placed (see "Spare parts/accessories").
1. Turn the device over.
2. Remove the blade bolts (24) on the
underside of the device
Turning the blade
3. Turn the blade (23) over.
4. Refasten the blades with the blade
bolts (23).
Advertisement
Chapters
Table of Contents
