Functional Description; Overload Protection; Overheat Protection; Overdischarge Protection - Makita UB001C Instruction Manual

7. Connect the end nozzle to the extension pipe.
When connecting, align the triangle marking on the end
nozzle and the extension pipe, and then push the end
nozzle until it clicks. After that, rotate the end nozzle to
a suitable position for your work.
1
► 1. End nozzle 2. Extension pipe 3. Triangle marking
When removing the end nozzle, align the triangle mark-
ings on the end nozzle and extension pipe, and then
pull out the end nozzle from the extension pipe.
1
► 1. End nozzle 2. Extension pipe 3. Triangle marking

FUNCTIONAL DESCRIPTION

CAUTION:
is switched off and the portable power pack is
disconnected from the machine before adjusting
or checking function on the machine.
Machine / battery protection system
2
The machine is equipped with a machine/battery
protection system. This system automatically cuts off
power to the motor to extend machine and battery life.
The machine will automatically stop during operation if
the machine or battery is placed under one of the fol-
lowing conditions:
3

Overload protection

When the machine or battery is operated in a manner that
causes it to draw an abnormally high current, the machine
automatically stops and the main power lamp of the
machine blinks in green. In this situation, turn the machine
off and stop the application that caused the machine to
become overloaded. Then turn the machine on to restart.

Overheat protection

When the machine or battery is overheated, the machine
stops automatically. When the machine is overheated,
the main power lamp of the machine lights up in red.
When the battery is overheated, the main power lamp of
the machine blinks in red. Let the machine and battery
cool down before turning the machine on again.

Overdischarge protection

When the battery capacity is not enough, the machine
stops automatically and the main power lamp of the
machine blinks in red. In this case, remove the battery
from the machine and charge the battery or change the
battery to fully charged one.
2
Main power switch
WARNING:
switch when not in use.
To turn on the machine, press the main power switch.
The main power lamp lights up in green. To turn off,
3 press the main power switch again.
2
► 1. Main power lamp 2. Main power switch
8 ENGLISH
Always be sure that the machine
Always turn off the main power
1