Changing Alarm Telephone Numbers - Honeywell HCI 300E Installation And Operation Manual

Changing settings at Hometronic Manager
If "Default settings" or "No Parameters" appears in the display,
interference has affected the wireless communication between
the Hometronic Manager and the HCI 300E (see "Help with
problems" on Page 80

Changing alarm telephone numbers

Here you enter the two telephone numbers called by the HCI 300E in
an alarm situation. The HCI 300E calls the first and second telephone
numbers three times in an alternating fashion until the call is
confirmed with the pound key (#).
In the "Alarm Parameter Menu" turn
►
the Input button to the left while
"Alarm Phone No. 1" is selected.
Press the Input button.
►
The following text is displayed:
Press the Input button and change the selected number by turning the
►
Input button.
Press the Input button.
►
The changed number is saved. The cursor flashes at the next
position.
76
Alarm Parameter Menu
Current values:
Alarm Phone No. 1
Alarm Phone No. 2
Alarm Phone No. 1
0
>
>
OK