Failed Binding - Honeywell HCI 300E Installation And Operation Manual

Failed binding

Binding has failed if the red LED in the HCI 300E is still flashing
regularly. Wireless data transfer has not been established or was
interfered with.
Carry out the following steps after a failed binding:
►
Repeating binding
–
– Improving transmission and repeating binding
Repeating binding
Reactivate Binding mode on the HCI 300E and on the Hometronic
►
Manager as described above.
Binding is repeated.
Improving data transfer
Remove/avoid interfering, shielding devices, e.g.:
►
– wireless headphones
wireless telephone base stations
–
(may not be located within 70 cm of the HCI 300E)
Move the HCI 300E and the Hometronic Manager closer together
►
(max. distance: 30 m).
Performing binding
63