Suppressing Alarm/Message Text - Honeywell HCI 300E Installation And Operation Manual

Special case: When using the HX 10 expansion module and active
priority input "1", the alarm/message text is also repeated after
pressing the pound sign (#). The alarm/message text must be
suppressed here (see "Suppressing alarm/message text" on
Page 67).

Suppressing alarm/message text

When using the HX 10 expansion module and active priority input "1",
the alarm/message text is also triggered again after pressing the
pound sign (#). The alarm/message text must be suppressed here:
Call the HCI 300E from an external telephone.
►
The HCI 300E responds with the words: "Please enter your PIN."
Enter the PIN* "1422010".
►
Enter the number of the reported alarm.
►
Alarm text
Fire Alarm
Burglar Alarm
Water Alarm
Alarm
Trouble Report
Enter "00".
►
Number
1
2
3
4
5
Operation
67