Session And User; Rmcp; Session Support; Virtual Lan - Hitachi DS240 Service Manual

BMC
Get and Set system boot options

Get Field Replaceable Unit (FRU) information

Get System Event Log (SEL) entries

Get Sensor Data Records (SDR)

Set Platform Event Filtering (PEF)

Set LAN configurations


Session and User

This BMC supports ten (10) user accounts. Each can have a different user name, password
and privilege level. Four accounts can login simultaneously. The available user privilege
levels are User, Operator, and Administrator.

RMCP+

Besides RMCP defined by DMTF, AST2500 also supports RMCP+ protocol defined in IPMI
2.0.
Authentication Algorithm types supported:

RAKP-none, RAKP-HMAC-SHA1, RAKP-HMAC-MD5.
Integrity Algorithm types supported:

none, HMAC-SHA1-96, HMAC-MD5-128, MD5-128.
Confidentiality Algorithm types supported:

none, AES-CBC-128.

Session Support

BMC supports 15 sessions for RMCP/RMCP+.
Issue IPMI command through RMCP will establish RMCP sessions.

Issue IPMI command through RMCP+ will establish RMCP+ sessions.

Login WebUI will establish RMCP sessions.

Activate Serial over LAN will establish one RMCP+ session, BMC only supports one

SOL session at one time.

Virtual LAN

BMC supports VLAN feature. BMC accepts the packets from LAN channel if they have
802.1q fields and their VLAN ID matched with the VLAN ID given in the LAN configuration
Parameters command. The valid VLAN IDs are 2 ~ 4094.
LAN I
NTERFACE
5-3