Cisco TelePresence System Profile Series User Manual page 32

Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents Getting started
Which codec does my system have?
The optional ability to call more than one participant—the MultiSite feature— does
not apply to all video endpoints. This depends on the type of codec your system is
equipped with. The following applies:
• Endpoints using Codec C40, C60 and C90 support MultiSite and MultiWay.
• Endpoints using Codec C20 do not support MultiSite, but MultiWay.
• Quick Set C20 / C20 Plus both use the Codec C20. Consequently, they do not
support MultiSite, but MultiWay.
Looking for codec type:
Open the bottom module lid as
shown, to see which type of
codec you have.
D14852.01 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Making calls Making calls Phone book usage
32
In-call features
At any rate, MultiSite is an optional feature that may—or may not—be present in your
endpoint.
If you need to see which type of codec your system is equipped with, open the
bottom module lid of the system.
Profile series codecs:
User guide
Advanced settings Contact us
Codec C90
Codec C60
Codec C40
Codec C20
www.cisco.com