Cisco TelePresence System Profile Series User Manual page 11

Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents Getting started Getting started
Adding a new camera preset (I)
Outside a call, press the
Layout
selfview followed by the
key, if needed. You will now
see the outgoing video from
your system.
This will will display the softkeys along the bottom of
the screen, as shown.
Camera presets Camera settings
Display the Camera presets
menu by pressing the Function
key corresponding to the
Camera presets softkey on
the remote control to open the
menu.
D14852.01 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Making calls
LAYOUT CONTROL
Show selfview
Wallpaper
key and select Show
Main source Exit
Phone book usage In-call features
Adjust pan, tilt and
zoom, as required.
CAMERA PRESETS
Pos. 2
Pos. 2
Pos. 3
Edit camera preset
In the Camera presets menu
navigate to Edit camera preset
and press the key.
Any presets already existing are
listed here.
11
User guide
Advanced settings Contact us
HOME
Call
Presentation
Camera control
Settings
Press the key to display
the Main menu and
navigate to
Camera control.
Press the key.
SET CAMERA PRESETS
Default
Zoom out
Whiteboard
Not defined
CAMERA PRESETS
Not defined
Default
Not defined
Zoom out
Not defined
Whiteboard
Not defined
Edit camera preset
Not defined
Navigate to the undefined
preset you would like to define.
When you have located it,
press the key.
www.cisco.com