Log In And Log Out Of Hunt Group; Turn Do Not Disturb On And Off; Set Do Not Disturb Options - Cisco Webex 800 Series User Manual

Log In and Log Out of Hunt Group

Log In and Log Out of Hunt Group

Hunt groups, also known as line groups, allow organizations that receive many incoming calls to share the
call load. Your administrator sets up a hunt group with a series of directory numbers. Phones ring based on
the hunt sequence that your administrator specifies for a hunt group. If you're a member of a hunt group, you
can:
• Log in to the hunt group when you want to receive hunt group calls.
• Log out of the hunt group when you no longer want to receive hunt group calls.
Note
Hunt group appears on the Features menu only if the administrator enables the hunt group log in and log
out feature. If you're unsure whether your extension is in a hunt group, check with your administrator.
Procedure
Step 1
Access the Cisco Phone
Step 2 Tap the Overflow menu.
Step 3
Select Features > Hunt group to toggle between logged in and logged out.

Turn Do Not Disturb On and Off

If you don't want to your phone to disturb you, you can enable Do Not Disturb. Do Not Disturb silences all
alerts and notifications, and send calls to voicemail, if enabled.
Procedure
Step 1
Swipe down on the status bar to open the quick access bar.
Step 2
Tap Do Not Disturb

Set Do Not Disturb Options

If enabled, you can set various Do Not Disturb options. For example, you can allow:
• Audio for sounds, media, or touch sounds
• Calls or messages from certain people in your contacts or favorites
• Calls from repeat callers
Cisco Webex Wireless Phone 800 Series User Guide
54
app.
to turn this feature on and off.
Cisco Phone App