Cisco Webex 860 Quick Reference Manual

Your phone
1. Headset jack, barcode scanner (860S
only), and programmable button (by default
Emergency)
2. Front camera and receive speaker
3. Programmable button (by default PTT) and
power button
4. USB charging port, microphone, and charger
contacts
5. Programmable buttons (by default: Scanner for
860S, Volume up, and Volume down)
6. Rear camera, rear microphone, flash lens/
torch, and programmable button (by default
Fingerprint)
7. Rear speaker, battery latch, and rechargeable
battery pack.
8. Barcode scanner (860S only)
Copyright © 2022 Cisco Systems, Inc. All rights reserved.
Webex Wireless Phone 860 and 860S quick reference guide
Turn on your phone
Press and hold the
vibrates and the first screen displays.
Unlock your phone
1. If the phone screen is in sleep mode, briefly
press the
Power
2. Swipe up on the
3. Enter your PIN or password and tap
OR: For 860 and 860S only—If configured, press
the programmed
Lock your phone
Briefly press the
Turn off your phone
1. Press and hold the
2. Tap
Power off
Make a call from the keypad
1. Access the
Cisco Phone
2. (Optional) If your phone has multiple lines,
access the desired line.
3. Tap
Keypad
4. Enter a phone number.
5. Tap Answer/Call
button until the phone
Power
button.
Lock screen.
Enter
button.
Fingerprint
Power button.
button.
Power
.
app.
.
.
Answer a call
Swipe to the right.
Answer/Call
Mute your microphone
1. From the active call screen, tap
2. To unmute your microphone, tap
again.
.
Change your audio option
1. From the active call screen, tap
options .
2. Select the desired available audio option:
,
Headphones Speaker
or .
Phone
Hold a call
1. From the active call screen, tap
2. To return to the held call, tap
Transfer a call to another person
1. From the active call screen, tap
2. Tap
Transfer to number
3. Enter the number to call or select an entry
from your recent Calls
4. Tap .
Transfer
.
Mute
Mute
Audio
, ,
Bluetooth
.
Hold
.
Hold
.
More
.
.
March 2022