Connecting To Smartcontrol - Motorola V300 User Manual

SmartControl

Connecting to SmartControl

You must check out your V300 Camera from Evidence Library to connect the camera to
SmartControl, depending on your agency configuration.
Important! SmartControl runs on any Android smart phone running Android 6 or
higher.
To activate:
Press the Function (top) button and the Display backlight button on the camera at the
n
same time and hold for 5 seconds
1 All previous device pairing information is cleared when you start the process. Any events
in memory will still be on the camera.
2 SmartControl is searching for a camera to connect to. It only takes a few seconds to
search for the connection. (Searching times out after 30 seconds. Try again if this
happens.)
3 The app finds any close camera. Check the screen on the V300 UI for your camera
name. Touch the area with the camera ID on the screen to select your camera.
4 Enter the Pin number shown on the V300 on the line provided for the Bluetooth pairing in
SmartControl.
74
V300 Body-Worn Camera User Guide
WGD00169 Revision C