Charging The Battery; Camera Charging Display; Low Battery, Camera Shutdown - Motorola V300 User Manual

Charging the Battery

A full charge in the transfer station or WiFi base can take up to 6 hours. The battery can run for
approximately 12 hours on a full charge, depending on the configuration and video resolution.
Dock the camera with battery or just the stand-alone battery in the WiFi base or the Transfer
n
Station II.
Tip: Before using the camera for the first time, fully charge the battery and
configure the camera.
Motorola Solutions recommends that you use the V300 USB base (plugged into an outlet) or the
transfer station inside your agency when fully charging the battery.
Charging a battery in a vehicle that's not running can impact the vehicle battery. For the best
battery life and fastest charging times, charge the V300 in a cool environment.
Important! If the ambient temperature gets too hot (40° C / 104° F) the battery may
stop charging. Do not leave the camera and battery in a hot car.

Camera charging display

While the V300 is charging:
The screen remains on the Event count
l
When the camera is fully charged:
The display scrolls CHARGE COMPLETE once, then returns to the Event-count screen
l
The display shows 100% and a fully-filled Battery Charge icon on the Event-count screen
l
The green LED displays a steady light
l
Two tones sound
l

Low battery, camera shutdown

If a battery error is issued, shut down the V300 Camera. This can leave 2 to 4 minutes of run time
before the camera runs out of power. Switch to your backup, charged battery.
V300 Body-Worn Camera User Guide
WGD00169 Revision C
Charging the Battery
33