Upgrading Wifi Base Firmware; Wifi Base Upgrade - Motorola V300 User Manual

Upgrading WiFi base Firmware

The Motorola Solutions V300 Camera automatically pulls firmware upgrades for the WiFi base
from Evidence Library (EL) when the V300 is docked.
Note: Evidence Library can be set up to push new firmware automatically For
instructions, see your Evidence Library Online Help.

WiFi base upgrade

To upgrade the WiFi base:
1. Dock the V300 in the Transfer Station II.
2. Upload events.
If an upgrade is available, EL pushes the firmware upgrade after the upload completes.
3. Undock the V300 after the firmware upgrade is complete.
4. Dock the V300 in the WiFi base in the vehicle.
WiFi base upgrade occurs automatically.
The amber LED blinks quickly.
o
When the upgrade is complete the amber LED blinks slowly.
o
5. Power cycle the in-car system so that the upgrade will take effect immediately.
Note: If you undock the camera before the upgrade is complete, the camera
downloads the upgrade the next time the camera is docked. The upgrade does not
take effect until the download is complete and the in-car system powers up.
If the camera is undocked after the upgrade and then quickly redocked, the amber
LED no longer shows. If the upgrade is already complete, no upgrade occurs.
Return to step 4.
If the ignition is turned off, without completing the upgrade, the next time the
camera is docked, the upgrade process begins again
V300 Body-Worn Camera User Guide
WGD00169 Revision C
Upgrading WiFi base Firmware
39