Download Print this page
Casio XJ-F21XN Manual

Casio XJ-F21XN Manual

Projector wired lan
Hide thumbs Also See for XJ-F21XN:

Advertisement

Quick Links

PJLink is a pending trademark or a registered trademark in Japan, the United
States, and other countries and areas.
Crestron and Crestron RoomView are registered trademarks of Crestron
Electronics, Inc. of the United States.
Crestron Connected is a trademark of Crestron Electronics, Inc. of the United
States.
Other company and product names may be registered product names or trademarks
of their respective owners.
The contents of this manual are subject to change without notice.
This manual is published under strict quality control standards. Should you notice
any errors or other problems, please feel free to contact us about them.
Copying of this manual, either in part or its entirety is forbidden. You are allowed to
use these instructions for your own personal use. Any other use is forbidden without
the permission of CASIO COMPUTER CO., LTD.
CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims
from third parties arising out of the use of this product or this manual.
CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits
due to loss of data due to malfunction or maintenance of this product, or due to any
other reason.
The sample screens shown in this manual are for illustrative purposes only, and
may not be exactly the same as the screens actually produced by the product.
Unless specifically stated otherwise, all illustrations in this manual show the
XJ-F211WN projector.
Projector Wired LAN
Version 4.00
Keep this manual in a safe place future reference.
1

Advertisement

loading

Summary of Contents for Casio XJ-F21XN

  • Page 1 Any other use is forbidden without the permission of CASIO COMPUTER CO., LTD.  CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third parties arising out of the use of this product or this manual. ...
  • Page 2 XJ-F21XN, XJ-F211WN, XJ-UT312WN, XJ-UT352WN, XJ-S400UN, XJ-S400WN projector (hereinafter referred to collectively as "the Projector" or "this Projector") can be controlled from an external device via its LAN port. Connection Use a LAN cable to connect the Projector to a network device with which you want to establish a wired LAN connection.
  • Page 3  A manufacturer name query returns CASIO.  A device name query returns XJ-F21XN / XJ-F211WN / XJ-UT312WN / XJ-UT352WN / XJ-S400UN / XJ-S400WN .  The password used for the connection authentication process is the same as the Setup page password on the Web Service Page.
  • Page 4 Crestron This Projector supports Crestron Electronics controller and software (RoomView Express®) commands. For detailed information and information about downloading RoomView Express®, visit the website below. URL: https://www.crestron.com/en-US/Software-Firmware/Software/RoomView-174;-Express/RoomView-reg;-Express/6-3-3-7 When using the Crestron controller, the controller IP address and other settings must be configured on the Projector.
  • Page 5 Caution  The Projector can be configured to enable or disable power via wired LAN on from the standby state. To do so, use [Network Settings]-[Remote On] on the Projector's Setup Menu. Enable: Power on enabled. Disable: Power on disabled. (Initial default) Initializing network settings operation with the Setup Menu will cause this setting to change to "Disabled".
  • Page 6 NGN190424E-B...

This manual is also suitable for:

Xj-f211wnXj-ut312wnXj-ut352wnXj-s400unXj-s400wn