Page 1
CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of data due to malfunction or maintenance of this product, or any other reason.
Network Connection is an application you can use to establish a LAN connection between a projector and a computer, and to send display images, movies, and audio from a connected computer to the projector. Important! The explanations in this section assume there is already a LAN connection between the projector and computer, and that the computer screen contents are being projected.
Network Connection Operations Network Connection Button Operations While there is a LAN connection between the projector and a computer, you can use the buttons on the Network Connection window to perform the operations described below. To do this: Click this button: Project a single computer screen that fills the entire (project 1 screen) projection screen images (project 1 screen)
Network Connection Function Menu Operations While there is a LAN connection between the projector and a computer, you can use the items on the Network Connection function menu (which appears when you click the function menu button) to perform the operations described below. To do this: Select this function menu item: Refer to:...
Add-on Driver Software Use of some parts of the Network Connection requires installation of the driver software shown in the table below. For information about how to obtain this software, go to the CASIO website (http://world.casio.com/download/projector/). To use this function:...
Projecting a Video Stream You can use Network Connection to play a movie and output the playback image to the projector for projection. Only the movie’s video stream is displayed on the projection screen. You can leave the normal desktop and Network Connection window (which are not projected) on the computer screen. Supported Playback Files AVI: 20 Mbps maximum 720/30P (MJPEG video, ADPCM audio) MOV: 20 Mbps maximum 1080/30P (H.264 video, ADPCM audio or AAC audio)
Remotely Controlling a Computer from a Smart Device This section explains how to use a smart device for remote control of a computer running Network Connection. Important! To perform remote control operation described here, your smart device will need to have C-Assist installed on it (see the separate “Network Function Guide”).
Other Network Connection Operations To terminate the current wireless LAN connection and re-connect On the Network Connection function menu, select [Server Search]. This terminates the current wireless LAN connection, and changes the projection screen to the LAN connection standby screen. Perform the procedure under “Establishing a Direct Wireless LAN Connection between the Projector and a Computer”...
Using the Token Wizard (Windows only) You can use the Network Connection token wizard to copy Network Connection to a USB flash drive. After you do that, you can run Network Connection on a computer that does not have the program installed simply by plugging the USB flash drive (called a “USB Token”) into the computer’s USB port.