Makita Maktec MT912 Technical Information page 4

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Barrel Section (cont.)
DISASSEMBLING
(3) Spindle section is now removed from Barrel as drawn in Fig. 3.
Fig. 3
1. Put Barrel on 1R232. And then remove Spindle by pressing
1R282 with Arbor press.
1R282
1R232
3. Remove Retaining ring S-12 with 1R291 from Spindle.
Retaining
ring S-12
Ball bearing 629Z
Spindle
Ball bearing
6001Z
1R291
2. Remove Ball bearing 629ZZ from Barrel
by pressing 1R247 with arbor press.
1R247
Ball bearing
629Z
4. Remove Ball bearing 6001ZZ with 1R045
from Spindle.
1R045
Ball bearing
6001Z
P 4/ 11
Barrel
Spindle