Makita XML06 Series Instruction Manual page 10

NOTE: Depending on the conditions of use and the
Control panel
The control panel has the main power switch, the mode switch-
1
4
1. 2. Mode switching lamp 3. Main
power lamp 4. Check button 5. Mode switching
button 6. Main power switch
Main power switch
WARNING:
switch when not in use.
To turn on the machine, press the main power switch.
machine, press the main power switch again.
NOTE: If the main power lamp lights up in red or
blinks in red or green, refer to the instructions for
NOTE:
tion. To avoid unintentional start up, the main power
lever and drive lever (if equipped) are not pulled for a
certain period after the main power switch is turned on.
Mode switching button
switching button. When the machine is turned on, the
the mode switching button, the machine shifts to the noise
reduction mode and the mode switching lamp lights up
button again, the machine returns to the normal mode.
2 3
5 6
-
Indicating the remaining battery
capacity
Battery indicator status
On
NOTE:
conditions.
NOTE:
Switch action
WARNING:
tridge, always check to see that the switch lever
actuates properly and returns to the original posi-
tion when released. Operating the machine with a
NOTE: The mower does not start without pressing the
switch button even the switch lever is pulled.
NOTE:
Increase the mowing height in this case.
Service Center.
For XML06/XML08
1.
2.
3. Press the main power switch.
10 ENGLISH
Remaining battery
50% - 100%
Before installing the battery car-
capacity
20% - 50%
0% - 20%
-