Advanta - G 2020; Table 080-16: Service Programming Mode, G 1472/G 2472; Table 080-17: Water Hardness Settings, G 1472/G 2472 - Miele G 1 Series Technical Information

Hide thumbs Also See for G 1 Series:
Table of Contents

Advertisement

Technical Information
Function
Country setting

Table 080-16: Service Programming Mode, G 1472/G 2472

1
In machines with software version -876, run the update "Optimized cleaning of tea
residues in Sensor Wash program" (mat. no. 06471560). Modified threshold values will
improve the cleaning outcome.
2
If the electronic needs to be replaced during servicing, the following steps must be taken
during programming: In the first step, set the country specification and model, then switch
off the appliance. Repeat access and then set appliance width and height, and the
appropriate supply water hardness.
3
The SER country specification includes the following countries: Portugal, France, the
Netherlands, Belgium and Great Britain.
Save and quit:
Switch off the appliance.
Water Hardness [°d]
37 – 50
51 – 60
61 – 70

Table 080-17: Water Hardness Settings, G 1472/G 2472

Note:
If the dishwasher is connected to an external ion exchanger water softener (i.e.
that needs to be regenerated with salt), the water hardness delivered by the
system must be set. If this value is unknown, set to 8°d (8.6 grains per gallon).
4.2.6

Advanta - G 2020

Initial requirements:
1. Close the door.
2. Switch off the appliance.
3. Turn the selector switch to the 12 o'clock position.
Accessing:
1. Press and hold the Start/Stop button.
2. Switch on the appliance.
Programming
Press the options button
39x. The "Tab" LED
flashes 3x slowly and 9x
2
quickly intermittently.
Press the Program button
as appropriate to make the
desired setting.
Water Hardness [gpg]
1
2
3
...
36
184
Display
The display shows p and a digit
alternately. The following countries
can be set: p1 = EUR (Europe); p2 =
AUS (Australia); p3 = USA; p4 =
JPN (Japan); p5 = I/E (Italy/Spain);
p6 = SER (Southern Europe).
1.1
2.1
3.2
...
38.5
39.6 – 53.5
54.6 – 64.2
65.3 – 74.9
G 1xxx/G 2xxx
3
Display
P1
P2
P3
...
P36
P50
P60
P70

Advertisement

Table of Contents
loading

Table of Contents