Description Of Functions; Overview; Intended Use; Technical Specifications - Grizzly MR 1000 Translation Of The Original Instructions For Use

Description of functions

The automatic lawn mower has a rotating
cutting tool parallel to the cutting plane. It
is equipped with a high-performance elec-
tric motor, a robust plastic housing and a
safety switch. In addition, the device has
infinite height adjustment and smooth-
running wheels.
Please refer to the descriptions below
for information on how the operating ele-
ments work.

Overview

1 Stop button
2 Cover for the LCD display
3 Cover for the cutting height ad-
justment
4 Carrying handle
5 On/Off switch
6 Boundary wire
7 Hooks
8 Fixing nails
9 Charger connector
10 Charger
11 Power cord for the charger
12 Charging station
12a Working range indicator
12b Charging station bumper
13 Charging station connector
14 Cutting height adjustment wheel
15 Control panel
16 Number keys
17 Power key
18 Start key
19 Home key
20 Arrow keys
21 Back key
22 OK key
23 LCD display
24 Rechargeable battery
25 USB port
26 Blade
27 Blade bolt

Intended use

This device is intended only for cutting
lawns and grassed areas in residential ap-
plications.
This device is not suitable for commercial
use. The warranty is void in the case of
commercial use.
Any other use not expressly approved in
the present instruction manual can dam-
age the device and thus present a sub-
stantial risk for the user.
The device is intended for use by adults.
Children and people who are not familiar
with these instructions may not use the
device. The use of the device in the rain
or a damp environment is prohibited. The
manufacturer is not liable for damage
caused by improper use or incorrect op-
eration.

Technical Specifications

Robotic mower ..........................MR 1000
Nominal voltage ............................ 28 V
Drive speed .................................1,2 km/h
Protection class ................................ III
Protection type...................................IPX4
Idling speed n ..........................3100 min
0
Cutting diameter .......................... 180 mm
Cutting height ......................... 20 - 60 mm
Uphill gradients ......................... 35% (20°)
Downhill gradients .................... 17% (10°)
Number of blades ................................... 3
max. work area ............................ 1000 m
Weight .............................................9,1 kg
Average operating time per charge .. 100 min*
GB
III
-1
2
83