Specifications For Saddle Finisher-Am2 - Canon imagePRESS C800 Series Troubleshooting Manual

Chapter 1
Capacity Per Tray*1
Max. Stapling Capacity/Available Staple
Size
Power Source/Maximum Power
Consumption
Dimensions (H x W x D)
Weight
Installation Space Including the Main Unit
(W x D)

1.1.7.1.13 Specifications for Saddle Finisher-AM2

[ Manual-related ]
Description
Specifications for the Saddle Finisher-AM2 are as follows.
Field Remedy
Saddle Finisher-AM2
Item
1-76
Staple mode
Tray B:
LTR, and EXEC:
3,000 sheets/200 sets (or 16 5/8" (423 mm) in height)
LTRR:
2,000 sheets/200 sets (or 11 1/4" (285 mm) in height)
11" x 17" and LGL:
1,500 sheets/200 sets (or 8 1/2" (216 mm) in height)
No Collating/Collate/Group mode with different paper sizes
Tray A:
1,000 sheets (or 5 3/4" (147 mm) in height)
Tray B*2:
If the High Volume Stack Mode is set to 'Off':
LTR and EXEC:
2,000 sheets (or 11 1/4" (285 mm) in height)
13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, and LTRR:
1,000 sheets (or 5 3/4" (147 mm) in height)
If the High Volume Stack Mode is set to 'On':
(The maximum stack volume may vary, depending on the paper type.)
LTR and EXEC:
4,000 sheets (or 19 1/4" (490 mm) in height)
LTRR:
2,000 sheets (or 11 1/4" (285 mm) in height)
11" x 17" and LGL:
1,500 sheets (or 8 1/2" (216 mm) in height)
13" x 19", 12 5/8" x 17 11/16", and 12" x 18":
1,000 sheets (or 5 3/4" (147 mm) in height)
Z-Fold mode (when the Paper Folding Unit-F1 is attached.)
Tray A, Tray B: 30 sheets or 10 sheets/1 set
Half Fold (when the Paper Folding Unit-F1 is attached.)
Tray A, Tray B: 50 sheets
*1 To stack 2,000 sheets or more LTR paper, use Tray B first, and then use Tray A for outputting paper.
*2 If the capacity values of the different paper sizes are different, the smallest value is applied to the Tray B capacity.
When the standard staple cartridge is attached
(The maximum stapling capacity may vary, depending on the paper type and weight.)
LTR and EXEC:
100 sheets (20 lb bond (80 g/m2)) or below 1/2" (11 mm) in height, 98 sheets (20 lb bond (80 g/m2)) + 2 sheets (140 lb
index (256 g/m2))
11" x 17", LGL, and LTRR:
50 sheets (20 lb bond (80 g/m2)) or below 1/4" (5.5 mm) in height, 48 sheets (20 lb bond (80 g/m2)) + 2 sheets (140 lb
index (256 g/m2))
Corner Stapling:
11" x 17", LGL, LTR, LTRR, EXEC, and Custom Size (8 1/4" x 7 1/8" to 11 3/4" x 17" (210 mm x 182 mm to 297 mm
x 432 mm))
Double Stapling:
11" x 17", LGL, LTR, LTRR, EXEC, and Custom Size (7 1/8" x 7 1/8" to 11 3/4" x 17" (182 mm x 182 mm to 297 mm
x 432 mm))
120-240 V AC, 50/60 Hz, 8 A/500 W or less
48 3/4" x 31 1/2" x 31 1/4" (1,239 mm x 800 mm x 792 mm)
Approximately 287 lb (130 kg)
92" x 36 3/4" (2,335 mm x 934 mm)
(when the Duplex Color Image Reader Unit-H1 and the Upright Control Panel-D1 are attached)
T-1-13
Specifications
0031-5179