Sorter (Finisher C1, Saddle Finisher C2, Finisher E1) - Canon GP405 Service Handbook

CHAPTER 4 SERVICE MODE

4. SORTER (Finisher C1, Saddle Finisher C2, Finisher E1)

For details, see the individual Service Manuals.
a. Finisher
Address bit
P000 bit0 stapler connection detection signal
(input) bit1 stapler absent detection signal
bit2 inlet paper detection signal
bit3 shutter open detection signal
bit4 swing guide open detecting
switch signal
bit5 tray upper limit detecting switch
signal
bit6 tray safety switch signal
bit7 front door open detecting switch
signal
P001 bit0 -
(input) bit1 -
bit2 -
bit3 -
bit4 feeder motor phase A output
bit5 feeder motor phase B output
bit6 feeder motor phase A* output
bit7 feeder motor phase B output
P002 bit0 alignment motor phase A output
(input) bit1 alignment motor phase B output
bit2 alignment motor current switch
bit3 -
bit4 -
bit5 -
bit6 -
bit7 -
P003 bit0 buffer path paper sensor
connector detection
(input)
bit1 buffer inlet paper sensor
connector detection
bit2 front cover open/closed sensor
connector detection
bit3 shift motor clock sensor
connector detection
bit4 -
bit5 -
bit6 -
bit7 -
4-34
Display Signal Connector
STPCNT J8-7
HOOKEMP J8-10
PENT J6-7
STOPN J7-3
SWGGOPN J5-12
TRKYLIM J5-8
TRAYSAFE J5-6
FDROPN J5-3
J10-6
J10-5
J10-4
J10-3
J11-5
J11-4
Action
L: connected.
L: staple present.
L: paper present.
H: closed.
L: closed.
H: upper limit.
H: safe.
L: closed.
H: connected.
H: connected.
H: connected.
H: connected.