Changing The Blade; Storage; Waste Disposal And Environmental Protection; Technical Specifications - Grizzly ERM 1435 G Instructions For Use Manual

Changing the Blade

If the blade is blunt, it can be sharpened
by a specialist workshop. If the blade is
damaged or showing signs of imbalance,
it must be replaced (see "Spare Parts").
1. Turn the equipment over.
2. Use sturdy gloves and hold the
blade firmly (25). Turn the blade
screw (26) anticlockwise off of
the motor spindle (24) using a
screwdriver.
3. Install the new blade in the
reverse order. Ensure that the
blade is positioned correctly and
the screw tightened firmly.

Storage

So the equipment takes up less
space, unlock the top 2 tensioning
levers (2) and fold down the bow
handle (1).
• Keep the equipment dry and out of
reach of children.
• Allow the motor to cool before storing
the equipment in a confined space.
• Do not cover the equipment with nylon
bags as moisture could build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
Waste disposal and envi-
ronmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center.
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Machines do not belong with do-
mestic waste.
• The plastic and metal parts employed
can be separated out and thus recy-
cled use can be implemented. Ask our
Service-Center for details.
• Defective units returned to us will be
disposed of for free.
• Throw the cut grass on the compost.
Do not throw it in the normal household
waste.

Technical Specifications

Electric Lawnmower ........... ERM 1435 G
Motor input power ......................... 1400 W
Mains voltage ..............220-240 V~, 50 Hz
Protection class ...................................
Protection type.................................. IP 24
Idling speed .............................. 3500 min
Cutting circle .................................350 mm
Cut height ..................................25-75 mm
Weight ..............................................17 kg
Lawn bag volume ................................ 38 l
Sound pressure specification
(L ) ...................82.0 dB(A), K
pA
Noise level specification
measured .....93.0 dB(A), K
guaranteed ...............................96 dB(A)
Vibration (a ) ........................ max. 1.3 m/s
n
This device is designed for operation on
a power supply network with a system
impedance Z at the transfer point
max
(domestic connection) of a maximum of
0.313 Ohms.
The user must ensure that the device is
operated only on a power supply network
that fulfils this requirement.
GB
II
-1
=3.0 dB(A)
pA
(L )
WA
=3.0 dB(A)
WA
2
27