Summary; Assembly; Assembling The Curved Handle; Installing The Grass Catcher - Grizzly ERM 1435 G Instructions For Use Manual

GB

Summary

1 Curved handle
2 Top clamping levers
3 Lower bar
4 Collision guard
5 Bottom clamping levers
6 Grass bag
7 Cut height adjusting lever
8 Rear wheels
9 Front wheels
10 2 carrying handles
11 Lawnmower housing
12 Cable holder
13 Level gauge
14 Cable strain relief
15 Connection cable
16 Power cable outlet
17 Release button (not visible)
18 Start lever

Assembly

Disconnect the plug before any
work on the equipment. There is a
risk of injury.

Assembling the Curved Handle

Attach cable strain relief:
Push the cable strain relief (
14) over the bottom bar (
Install lower bar:

Slightly spread the ends of the
lower bar (3) and place them on
the threaded bolts on the right
and left of the housing.
‚
Put on the washers from the
package and screw on the bot-
tom clamping levers (5).
ƒ
Lock the clamping levers (5)
by pushing them towards the
bar (3). Clamping levers to be
24
tightened and contacting the bar
such that they clamp at average
force.
Otherwise you may have to
tighten (turn clockwise) or loos-
en them (turn anticlockwise).
Install curved handle:

Use the screws and washers
from the package as well as the
top clamping levers (2) to mount
the curved handle (1) on the
right and left ends of the bottom
bar (3). Three positions are pos-
sible.
‚
Turn the clamping levers (2)
clockwise.
ƒ
Lock the clamping levers (2) as
described in section
Clip on the cable hook:
Clip on the cable hooks (
to the bottom bar to fasten the
connection cable (

Installing the grass catcher

Assemble the grass catcher:

Clip the rubber lip of the grass
catcher net (19) into the hard plas-
tic tray of the grass catcher (6).
‚
3). Insert the linkage tubes (20)
into the grass catcher net (19).
Make sure to fully insert the
tubes (see small figure).
The tube bows fit into the
groove (21) at the bottom of the
grass catcher
ƒ
Pull the plastic straps (22) over
the linkage tubes (20).
„
Use the screws and washers
(23) from the package to tighten
the linkage tubes (20).
.
12)
15).