Page 1
1.0 How to: Cone Burr Shim Installation Sette 30, Sette 270, Sette 270W, Sette 270Wi Time: 10 min Difficulty: Easy Tools/supplies: 5mm hex key (included in grinder shim kit S902) Parts: Sette Cone Burr Shim (SKU: S904) (included in grinder shim kit)
Page 2
Place the assembly on a work surface. Press down evenly on the metal adjustment assembly to remove the cone burr subassembly. On separation, the adjustment subassembly will snap free Pull to remove the nozzle. www.baratza.com support@baratza.com rev. 5/23/2019...
Page 3
Remove the cone burr. Add 1 shim. Install the cone burr. Note that the burr and holder are keyed. Bolts must insert into burr Install the cone burr hex bolt and tighten. Tighten fully www.baratza.com support@baratza.com rev. 5/23/2019...
Page 4
The parts will make an audible snap sound. Insert the cone burr holder halfway up into the grinder. Rotate the assembly as needed until the cone burr holder is keyed into the unit. www.baratza.com support@baratza.com rev. 5/23/2019...
Page 5
Press up on the assembly and rotate the blue tab towards the rear of the grinder. Install the hopper and return the unit to operation. If you have questions, or encounter any issues with this guide, contact support@baratza.com www.baratza.com support@baratza.com rev. 5/23/2019...