Baratza SETTE 30 Manual
Hide thumbs
Also See for SETTE 30:
- User manual ,
- Quick start manual (25 pages) ,
- Replacement manual (13 pages)
Table of Contents
Advertisement
Quick Links
®
Sette™ 30
CONICAL BURR GRINDER
INTRODUCTION
Thank you for purchasing the Sette 30
Conical Burr Coffee Grinder. With the
Sette, it's now easier than ever to make
a delicious cup of coffee.
Below are detailed descriptions of the features that make the Sette 30
stand out from other grinders in its class.
Conical Burrs
Manufactured in Liechtenstein, the 40mm conical burrs
grind coffee at 3.5g to 5.5g/sec. depending on the setting.
These conical burrs are durable and will remain sharp for
many years. The adjustment mechanism provides precise
burr alignment ensuring accurate grinding.
Grind Adjustment
The Sette 30 grinds from espresso to manual brew. The
adjustment mechanism is directly connected to the cone
burr resulting in immediate and true grind adjustment.
SETTE™ 30 MANUAL
Digital Control Panel
The front mounted control panel with backlit LED display
is user friendly and has grind time settings within 0.01
second. Simply press the START button and the Sette
automatically delivers precise dosing.
Device Holder
The Sette 30 has a stationary device holder that allows
you to remove and re-orient the arms to grind directly into
the supplied grounds bin or a portafilter - a unique feature
amongst all other home grinders.
May 2019 (v3)
Advertisement
Table of Contents
Related Manuals for Baratza SETTE 30
Summary of Contents for Baratza SETTE 30
- Page 1 Conical Burr Coffee Grinder. With the Sette, it’s now easier than ever to make a delicious cup of coffee. Below are detailed descriptions of the features that make the Sette 30 stand out from other grinders in its class. Conical Burrs...
-
Page 2: Table Of Contents
SETTE™ 30 MANUAL ® TABLE OF CONTENTS INTRODUCTION TABLE OF CONTENTS SAFETY INFORMATION PARTS IDENTIFICATION OPERATION Before Using Your Grinder Duty Cycle Hopper Installation Setting the Grind Control Starting Settings Time Based Grinding Operation Pulse Function & Manual Mode CARE AND CLEANING Removing the Bean Hopper Removing the Cone Burr/Adjustment Collar Assembly Reinstalling the Cone Burr/Adjustment Collar Assembly... -
Page 3: Safety Information
To unplug, grasp plug and remove from the outlet. Baratza will not accept any liability for damage, injury, or Never pull on the cord. warranty if the grinder is used other than for its intended Keep the appliance and its cord out of reach of children purpose (i.e. -
Page 4: Parts Identification
SETTE™ 30 MANUAL ® PARTS IDENTIFICATION Hopper Lid Bean Hopper Bean Shutoff Knob Hopper Alignment Indicator Control Panel Grind Adjustment Assembly Convertible Device Arms Grounds Bin Removable Grounds Tray Power Cord Installation/Removal Indicator Macro Adjust Installation/Removal Tab LCD Display Grinding Indicator Stop Start/Pause Grind Time Adjustment Buttons... -
Page 5: Operation
SETTE™ 30 MANUAL ® OPERATION BEFORE USING YOUR GRINDER Prior to using your Sette grinder for the first time, you should wash the bean hopper and grounds bin in warm soapy water. Do not wash the grind adjustment assembly or burr. See the section on Care and Cleaning for instruction on how to remove and reinstall these parts. -
Page 6: Setting The Grind Control
SETTE™ 30 MANUAL ® Warning: The Sette grinds at a very high speed, be careful not to overfill your portafilter or bin! If a mound of coffee backs up into the chute it will clog the grinder. Unclogging requires thorough manual cleaning, and possibly a new internal fuse. For details, see page 8. SETTING THE GRIND CONTROL The adjustment ring moves from coarse (31) to fine (1). -
Page 7: Time Based Grinding Operation
5 seconds give or take. At a grind size for an automatic brewer (like a drip coffee maker), the Sette 30 grinds coffee at around 5g per second (again, this will vary based on your coffee and specific grind size). -
Page 8: Care And Cleaning
SETTE™ 30 MANUAL ® CARE AND CLEANING REMOVING THE BEAN HOPPER Rotate the bean shutoff knob to the CLOSED position, then press the START button to purge any remaining beans. Remove the power plug from the power outlet. Remove the hopper by rotating it counterclockwise until it stops, and then lift the bean hopper off of the grinder housing. -
Page 9: Reinstalling The Cone Burr/Adjustment Collar Assembly
SETTE™ 30 MANUAL ® REINSTALLING THE CONE BURR/GRIND ADJUSTMENT ASSEMBLY Align the blue installation/removal indicator on the grind adjustment assembly with the blue installation/ removal indicator on the right side of the machine (fig E). Keeping the two blue indicators aligned, gently press up on the grind adjustment assembly and rotate the black cone burr holder (fig F) until the tabs and notches line up and the cone burr holder slides up into the machine. -
Page 10: Recalibrating/Shimming The Cone Burr
SETTE™ 30 MANUAL ® RECALIBRATING/SHIMMING THE CONE BURR: After the first few pounds of coffee, the grind produced at the lowest setting may not be fine enough for espresso. To shift the grind range finer, a small washer (included) can be installed below the cone burr. First follow the steps in “Removing the Bean Hopper”... -
Page 11: Cleaning The Grounds Bin, Hopper & Burrs
SETTE™ 30 MANUAL ® CLEANING THE GROUNDS BIN, HOPPER & BURRS Wash the grounds bin, hopper, and the hopper lid in warm soapy water, then rinse and dry. Never wash the burrs or they will rust. If the grinder is used daily, the burrs should be cleaned every few months with a stiff brush (included) or by using tablets (see below for Automatic Cleaning). -
Page 12: Warranty And Service
U.S. & CANADIAN WARRANTY INFORMATION Limited Warranty for Baratza Grinders is 1 year from the original date of purchase or 25 hours of cumulative run time, whichever occurs first. This warranty covers all defects in materials and workmanship (parts and labor) including free ground transportation to and from our repair facility within the US and Canada.