Install A Key Expansion Module On 8851, 8861, And 8865 Phones - Cisco 8000 Series Installation Manual

Install a Key Expansion Module on 8851, 8861, and 8865 Phones

Install a Key Expansion Module on 8851, 8861, and 8865 Phones
1
Remove the accessory connector covers.
3
Firmly press the key expansion module
into the spine connector.
2
Firmly press the spine connector to the
phone.
4
Fasten the screws into the phone.
Installation Guide for Cisco IP Phone with Multiplatform Firmware
Key Expansion Module Installation
Spine connector
7