Changing Operating Mode - Makita DVC560 Instruction Manual

Cordless upright cleaner
Hide thumbs Also See for DVC560:
Table of Contents

Advertisement

Switch action
► 1. ON / mode change button 2. OFF button
Turning on / off the appliance
To start the appliance, simply push the ON / mode
change button. To switch off, push the OFF button.
CAUTION:
Always put the head of the appli-
ance on the floor when turning on the appliance.
Otherwise an accident due to entanglement may
occur and cause a personal injury.

Changing operating mode

You can change the operating mode in three steps:
"lower noise level (1)", "normal (2)", and "high (3)".
If you want to change operating mode, press the ON
/ mode change button when the appliance is running.
The operating mode switches in order "lower noise level
(1)" , "normal (2)" , and "high (3)".
The appliance will start in the same mode as the previ-
ous setting.
Lighting up the LED lamp
CAUTION:
Do not look in the light or see the
source of light directly.
The appliance is equipped with the LED lamps.
See the paragraph of the battery check / LED lamp
button for operation.
1
► 1. LED lamp
Foot lever
CAUTION:
position when you let go of the handle. Otherwise the
1
appliance may accidentally fall and cause injury.
CAUTION:
gers between the main body and the head of the
2
appliance.
To unlock the upright position of the appliance, step on
the foot lever and pull the handle backward.
The range of motion is 90 degrees from the upright position.
► 1. Foot lever
To lock the appliance in upright position, raise up the
handle forward until the foot lever locks the position
with click.
NOTE: While the appliance is in the upright position,
the brushroll stops rotating.
Adjusting the height of brushroll
CAUTION:
ing lever comes into the position properly before
operation.
The height of brushroll can be adjusted in 4 steps.
Turn the adjusting lever to your desired height.
When the adjusting lever points the A mark, the
brushroll is located at the lowest point above the floor
and is suitable for cleaning hard floors and short-haired
carpets. When the adjusting lever points the B mark, the
brushroll is located at the highest point above the floor
and is suitable for cleaning long-haired carpets.
10 ENGLISH
Always lock the appliance in upright
Be careful not to pinch your fin-
1
Always make sure that the adjust-

Advertisement

Table of Contents
loading

Table of Contents