Copying A Sample Into Another Pad; Adjusting The Playback Volume For Each Pad - Yamaha SU200 Owner's Manual

Copying a Sample into Another Pad

Use this feature to copy a sample from one pad into another.
Z
Switch off all pads, and then press the [JOB] button.
• You can escape from Job mode by pressing the [JOB] button once again.
NOTE
X
Press the [COPY] button.
SCALE TIME STRETCH
C
Press the pad containing the sample you want to copy.
BANK
V
Press the pad you want to copy to
(If you want to copy to a different bank, press the appropriate bank button before pressing the pad.)
The SU200 executes the copy, and then exits from Job mode.
BANK
• If a sample already exists on the pad you select as the copy destination, the SU200 first displays
NOTE
the "Replce Sure?" warning message-indicating that the copy operation will replace (and delete)
the existing sample. If you wish to proceed, press [+1/YES]; the SU200 will then complete the
copy and exit from Job mode.

Adjusting the Playback Volume for Each Pad

Use this feature to adjust the relative playback level (volume) for each pad.
Z
Switch off all pads, and then press the [JOB] button.
NOTE • You can escape from Job mode by pressing the [JOB] button once again.
X
Press the [PAD VOL] button.
SCALE TIME STRETCH
50
Chapter 7 Other Useful Features
COPY PAD VOL
PAD
BANK BANK
BANK BANK
COPY PAD VOL
PAD
Copy
From?
Copy
To?
Vol
Pad?
A-4