Recording a Sample
Now try taking a sample of your own voice, and then playing it back by pressing the pad.
Z
Connect a microphone to the MIC INPUT jack. (See page 10.)
X
Switch memory protection off. (See page 51.)
C
Switch off all pads, and then press the [REC] button to enter Sampling mode.
• You can escape from Sampling mode by pressing the [EXIT] button.
NOTE
V
Press the pad into which you want to record your new sample.
BANK
BANK
BANK
GATE
ONE SHOT
TRIGGER
STEREO/MONO
• If a sample is already recorded on the pad you select, the display asks whether to delete (over-
NOTE
write) it. The message takes the form Delete B-1?, where the letter indicates the selected
bank (A, B, or C) and the number indicates the selected pad (1 to 8). Press [+1/YES] to delete
the existing sample and continue with recording, or press [-1/NO] to cancel and retain the
existing sample.
20
Quick Start
MIC INPUT
PHONES
REC
LOOP TR
RESMPL
REC
PLAY
NORMAL
START
END
LOOP
REVERSE
POINT
POINT
GRADE
Which
Pad?
Press
Start