Extract (Deleting The Unused Ends Of A Sample) - Yamaha SU200 Owner's Manual

EXTRACT (Deleting The Unused Ends of a Sample)

Once you have set the start and end points for a sample (see page 30), only the section that lies
between these two points is played back. You can use the EXTRACT feature to delete the parts of
the sample that are no longer played.
A B C
Start Point
Z
Switch off all pads, and then press the [DELETE/EXTRACT] button twice to enter
Extract mode.
• You can use the [DELETE/EXTRACT] button to toggle between Delete and Extract modes.
NOTE
• You can escape from this mode by pressing the [EXIT] button.
X
Press the pad that holds the sample that you want to edit.
BANK
C
Press the [+1/YES] button to execute the extraction. The SU200 deletes the parts of
the sample that lie outside the range defined by the start and end points.
–1/NO
BPM
Sample
D E
End Point
BANK BANK
+
1/YES
Sample
EXTRACT
C
DELETE
EXTRACT
Extrct
B-1?
Bank Pad
The SU200 executes the extraction and then
returns to Pad-Play mode.
D
Chapter 3 Sample Editing
35