Power Connections - Yamaha SU200 Owner's Manual

While the SU200 can run from either an optional AC adaptor or batteries, Yamaha recommends use
of the more environmentally safe AC adaptor. Follow the instructions below according to the power
source you intend to use.
Using an Optional AC Power Adaptor
Z
Make sure that the SU200's STANDBY/ON switch is set to STANDBY.
X
Connect the optional AC adaptor (PA-3B or other adaptor specifically recommended by
Yamaha) to the power supply jack.
C
Plug the AC adaptor into an AC outlet.
To disconnect the adaptor: Set the STANDBY/ON switch to STANDBY, then unplug the adaptor from the
AC outlet, and then disconnect it from the SU200 power supply jack.
WARNING
• Use ONLY a Yamaha PA-3B AC Power Adaptor (or other adaptor specifically recom-
mended by Yamaha) to power your instrument from a standard electrical outlet. The use
of other adaptors may result in irreparable damage to both the adaptor and the SU200.
• Unplug the AC Power Adaptor when not using the SU200, or during electrical storms.
Using Batteries
Z
Open the battery compartment cover located on the instrumentís bottom panel.
X
Insert six new batteries, being careful to follow the polarity markings on the inside of the
compartment.
C
Replace the compartment cover, making sure that it locks firmly in place.
12

Power connections

Power connections
STANDBY DC IN
ON
X
AC outlet
PA-3B
C