Setting The Midi Clock And Midi Channel - Yamaha SU200 Owner's Manual

The following tables show the correspondence between MIDI notes and SU200 pads.
Pad
A1
A2
A3
A4
A5
A6
A7
A8

Setting the MIDI Clock and MIDI Channel

Z
Switch off all pads, and then press the [JOB] button to enter Job mode.
• You can escape from Job mode by pressing the [JOB] button once again.
NOTE
X
Press the [MIDI] button (pad 8) to enter MIDI Setup mode.
T E
C
Set the MIDI clock and MIDI channel as shown below.
Select use of either the
internal clock (INT) or an
external MIDI clock (EXT).
If you set the value to Off, the
SU200 will not recognize any
MIDI channel messages.
V
Press the [EXIT] button or the [JOB] button to escape from Job mode.
Note Pad
C1 B1
D1 B2
E1 B3
F1 B4
G1 B5
A1 B6
B1 B7
C2 B8
M I D I
+
–1/NO 1/YES
BPM
+
–1/NO 1/YES
BPM
EXIT
Press twice.
Note
D2
E2
F2
G2
A2
B2
C3
D3
JOB
Sync
INT
Sync
INT
MIDICh
Off
JOB
or
Press once.
Pad Note
C1 E3
C2 F3
C3 G3
C4 A3
C5 B3
C6 C4
C7 D4
C8 E4
T E M I D I
Chapter 5 MIDI Features
39