Yamaha MT-09 Owner's Manual page 39

Instrument And Control Functions
1
(a)
4
1. Rebound damping force adjusting screw
Rebound damping setting:
Minimum (soft):
11 click(s) in direction (b)*
Standard:
11 click(s) in direction (b)*
Maximum (hard):
0 click(s) in direction (b)*
* With the adjusting knob fully turned in
direction (a)
Compression damping force
The compression damping force is
adjusted on the left front fork leg only. To
increase the compression damping
force and thereby
compression damping, turn the adjusting
screw in direction (a). To decrease the
compression damping force and thereby
soften the compression damping, turn
(b)
the adjusting screw in direction (b).
TIP
Be sure to perform this adjustment on
the left front fork leg.
1. Compression damping force adjusting
screw
Compression damping setting:
Minimum (soft):
11 click(s) in direction (b)*
Standard:
11 click(s) in direction (b)*
Maximum (hard):
harden the
0 click(s) in direction (b)*
* With the adjusting screw fully turned
in direction (a)
1
(a) (b)
4-22
TIP
Although the total number of clicks
of a damping force adjusting
mechanism may not exactly match
the above specifications due to
small differences in production, the
actual number of clicks always
represents the entire adjusting
range. To obtain a
adjustment, check the number of
clicks of each damping force
adjusting mechanism and modify
the specifications as necessary.
When turning a damping force
adjuster in direction (a), the 0 click
position and the 1 click position
may be the same.
precise