Yamaha MT-09 Owner's Manual page 30

Coolant temperature mode
1
1. Coolant temperature display
This display shows the
temperature from 40 C to 116 C in 1 C
increments.
If the message "HI" flashes, stop the
vehicle, then stop the engine, and let
the engine cool. (See page7-40.)
TIP
When the coolant temperature is
below 40 C, "Lo" will be displayed.
The coolant temperature varies with
changes in the weather and engine
load.
Air intake temperature mode
1. Air intake temperature display
coolant
The air intake temperature display
indicates the temperature of the air
drawn into the air filter case.
This display shows the air intake
temperature from –9 C to 99 C in 1 C
increments.
TIP
–9 C will be displayed even if the air
intake temperature falls below–9 C.
The air intake temperature may
vary from the ambient temperature.
Instrument And Control Functions
Brightness control mode
1
1. Brightness level display
The brightness of the multi-function
meter unit panel can be adjusted.
To adjust the brightness
1.
2.
3.
4.
4-13
1
Turn the key to "OFF".
While pushing the "SELECT"
button, turn the key to "ON" and
continue pushing the button until the
display switches to the brightness
control mode.
Push the "RESET" button to set the
brightness level.
Push the "SELECT" button to
confirm the selected brightness level
and exit the brightness control
mode.
4