Honeywell GasLab Q2 Manual page 185

Time-controlled actions: The enCore device provides following time-related events of a
type in the export branch
Every second /
Every minute /
Every hour /
Every day (at midnight)
Every Sunday (at midnight)
Every Monday (at midnight)
Every month (midnight on 1st)
Event signals in a second rhythm are formed relative to a full minute and event
signals in a minute rhythm are formed relative to a full hour. For example:
This means that immediately after the device is restarted and until a cyclic event
signal is first triggered the time depends on the boot time and may be shorter than
the associated cycle. This special case can only occur once immediately after the
Example: If the enCore device is switched on at 12:02:30 and the signals
other minute and
12:03.00, the signal
Export values based on the system time in the export branch
Service – Contract hour: <single contract/two contracts>:
(initial contract or single contract)
Contract hour (numeric)
Every day (at contract hour)
Every Sunday (at contract hour)
Every Monday (at contract hour)
Every month (at contract hour on 1st)
(second contract – optional)
Contract hour 2 (numeric)
Every day (at 2nd contract hour)
Every Sunday (at 2nd contract hour)
Every Monday (at 2nd contract hour)
Every month (at 2nd contract hour on 1st)
Information for general use
Rev. M / 73023639
CONFIGURATION AND ANALYSIS SOFTWARE ENSUITE
Basic System – or standard time
Every <2, 3, 5, 10, 15, 20, 30> seconds
Every <2, 3, 5, 10, 15, 20, 30> minutes
Every <2, 3, 4, 6, 12> hours
Special case: Trigger for a longer cycle duration is activated first
Every other minute e.g., 12:02:00 ... 12:04:00 ... 12:06:00 ..., etc.
Every 3 minutes e.g., 12:03:00 ... 12:06:00 ... 12:09:00 ..., etc.
Every 3 minutes are used as triggers, at system time
Every 3 minutes is formed and only subsequently at
12:04.00 is the signal
Time Service –
device is restarted.
Every other minute formed.
185
signal
Timer events:
Every
Basic System – Time
GasLab Q2