Fujitsu FI-800R Operator's Manual page 98

Attach the pad unit so that the protrusions are placed as shown below.
ATTENTION
● Attach the pad unit with the front side up. If the pad unit is attached upside down, paper jams or other
feeding errors may occur.
● Make sure that the pad unit is attached firmly. Otherwise, paper jams or other feeding errors may occur.
6
Close the ADF.
For details, refer to How to Close the ADF (page
Be careful not to get your fingers caught when closing the ADF.
CAUTION
7
Plug in the power cable and turn on the scanner.
For details, refer to How to Turn the Power ON (page
8
Clear the pad unit counter.
Start up the Software Operation Panel and clear the counter.
For details, refer to Clearing the Sheet Counters (page
33).
29).
164).
98
Replacing the Consumables