The Quality Of A Scanned Image Of A Picture Or Photo Is Poor - Fujitsu FI-800R Operator's Manual

The Quality of a Scanned Image of a Picture or Photo Is Poor

Check the following points
● Did you configure the settings in the scanner driver to scan in black & white mode? (page 121)
● Are the glass and rollers inside the ADF clean? (page 121)
If the problem persists, refer to
(page 140) and take measures accordingly. If the problem still persists, check each item in
Contact the Scanner Service Provider (page 141)
purchased this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety Precautions
supplied with this product, and then make an inquiry.
●
Did you configure the settings in the scanner driver to scan in black & white mode?
Solution
Use a scanner driver to configure the scan settings that do not "binarize" (output in black and white), and
then perform a scan.
The scanned image may differ from the original image significantly if you simply "binarize" (output in
black & white) a picture or a photo.
●
Are the glass and rollers inside the ADF clean?
Solution
Clean the dirty parts.
For details, refer to
The First Measures to Take When You Encounter any Errors or Troubles
Cleaning the Inside of the Scanner (ADF) with a Cloth (page
121
first, then contact the distributor/dealer where you
Troubleshooting
Before You
89).