Scanning Does Not Start - Fujitsu FI-800R Operator's Manual

Scanning Does Not Start

Check the following points
● Is the document inserted into the return path opening or loaded in the ADF paper chute (feeder)
correctly? (page 119)
● Is the ADF closed properly? (page 119)
Is the USB cable connected properly? (page 119)
●
If the problem persists, refer to
(page 140) and take measures accordingly. If the problem still persists, check each item in
Contact the Scanner Service Provider (page 141)
purchased this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety Precautions
supplied with this product, and then make an inquiry.
●
Is the document inserted into the return path opening or loaded in the ADF paper chute (feeder) correctly?
Solution
Reinsert the document into the return path opening or reload it in the ADF paper chute (feeder).
●
Is the ADF closed properly?
Solution
Close the ADF firmly.
If the document is caught in the ADF, remove the document and close the ADF.
●
Is the USB cable connected properly?
Solution
Connect the USB cable properly.
For details, refer to Getting Started.
The First Measures to Take When You Encounter any Errors or Troubles
first, then contact the distributor/dealer where you
119
Troubleshooting
Before You