Fujitsu FI-800R Operator's Manual page 199

*1:Long page scanning supports documents (loaded in the ADF paper chute (feeder)) with a length of up to
5,588 mm (220 in.) when the resolution is set to 200 dpi or lower.
*2:This is for scanning with the ADF paper chute (feeder). Note that this is the hardware limitation, and the
software's processing time such as data transfer time is added to the actual time of scanning.
*3:This is for scanning with the ADF paper chute (feeder). The capacity varies depending on the paper weight.
For details, refer to Documents for Scanning (page
*4:Use the USB cable that is supplied.
When connecting the USB cable to a USB hub, make sure you connect it to a USB hub that is connected to
the USB port of a computer.
Connection with USB 3.2 Gen1x1/USB 3.0/USB 2.0 requires the USB port and the hub to support USB 3.2
Gen1x1/USB 3.0/USB 2.0.
Also note that the scanning speed slows down when USB 1.1 is used.
48).
199
Appendix