Samsung OfficeServ 7400 Technical Manual page 102

OfficeServ 7400
TECHNICAL MANUAL
NOTE: THE DIRECTORY CARD SLIDE TRAY IS NOT
WALL-MOUNTING KEYSETS
iDCS keysets come equipped with a reversible base wedge. To wall-mount a keyset,
remove the wedge from the keyset and remove the directory tray from the wedge.
Mount the wedge to the wall using one of the methods below
Use screw holes 1 and 2 to attach the base wedge to a standard electrical outlet box.
Use screw holes 1 and 3 to attach to a standard telephone wall-mount plate with
locking pins. This method can cause the keyset to wobble as the keyset feet do not fit
securely to the mounting surface.
Use screw holes 4 and 5 if you are mounting on dry wall with a hole in the middle for
cable access.
1
4
2
3
HOLES FOR MOUNTING SCREWS
Figure 7.20 Wall-Mounting a Keyset
OR
OR
7.14
Table of Contents
Home Page
INSTALLATION
PART 7 JUNE 2006
5
(see Figure 7.20).