GE EPM6000 Instruction Manual page 61

Note
EPM6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE
CHAPTER 5: COMMUNICATION INSTALLATIONEPM6000 COMMUNICATION AND PROGRAMMING OVERVIEW
3. Click the Connect button on the screen.
If you do not connect with the Factory Initial Default Settings within 5 seconds after
powering on the meter, the Device Profile reverts to the programmed Device Profile. In that
case, disconnect and reconnect power before clicking the Connect button.
The Device Status screen appears, confirming a connection.
Click OK. The main screen of Communicator EXT software reappears.
FIGURE 5–8: Serial Port settings
FIGURE 5–9: Device Status screen
5–7