Charge Your Arlo Go Battery
The Arlo Go battery is partially charged when it leaves the factory.
¾ To recharge the battery:
1.
Connect the power adapter to the camera.
Caution:
You must use an Arlo Go power adapter to charge the
battery. Do not try to power the camera or charge the battery
with any power adapter other than the one provided with the
Arlo Go camera.
2.
Plug the power adapter into an electrical outlet.
The camera LED lights solid blue for two seconds when the
camera battery is fully charged.
12
Arlo Go Access and Cloud Storage
The Arlo Go camera is designed to connect to the AT&T network.* During
setup, you can add the camera to your Arlo account.
After setup, the Arlo Go camera uses the AT&T network** to send
recordings to the cloud storage associated with your Arlo account.
* Requires a wireless service plan. Additional restrictions and data charges may apply.
Coverage and service not available everywhere.
** May incur data rates and usage.
13