Table of Contents
Advertisement
Limitless™ WDRR Receiver
5.4 Lost RF Link output LED
Refer to Figure 2. The lost RF link output LED indicates when any one or more of the Limitless™ inputs
has lost the RF link or communication with the WDRR. The LED will change state as shown below.
RF Link switch position 0-9, A-E
Lost RF Signal LED status
Solid green
Solid red
RF Link switch position F
Sequence each LED color
5.5 RF Link Strength LEDs
Refer to Figure 2. The five (5) blue LEDs indicate the RF link strength of the Limitless™ input when
communicating (i.e. Limitless™ input change of state/actuation) with the WDRR receiver. One (1) blue LED
illuminated indicates a weak RF link. And increasing number of blue LEDs illuminated indicates a stronger
RF link.
5.6 Configuration LEDs
Refer to Figure 2. The Function button
configuration modes such as set-up, pairing, purge, etc. The configuration LEDs
modes as well as different states. See Section 6 for more detail.
Condition
Acceptable RF link(s)
Lost RF link(s)
LED test mode
allows the Limitless™ WDRR Receiver to enter many different
50063987
Issue 1,
indicate both different
Honeywell Sensing and Control 13
Hide quick links:
Advertisement
Table of Contents
