Table of Contents
Advertisement
Limitless™ WDRR Receiver
5.2 Tri-color Output LEDs
Refer to Figure 2. Each tri-color output LED indicates when its respective Limitless™ input is paired to the WDRR
and when it changes state. Each tri-color output LED also indicates a lost RF link between the respective
Limitless™ input and WDRR or if the battery voltage level is low or dead. See tables below.
RF Link switch position "0"
Output LED status
LED off
Solid green
Solid red
Solid yellow
Flashing yellow
RF Link switch position 1-9, A-E
Output LED status
LED off
Flashing green
Flashing red
Solid yellow
Flashing yellow
RF Link switch position F
Sequence each LED color
5.3 Low Battery Output LED
Refer to Figure 2. The low battery output LED indicates when any one or more of the Limitless™ inputs has
a low or dead battery. The LED will change state as shown below.
RF Link switch position 0-9, A-E
Low battery LED status
Solid green
Solid red
RF Link switch position F
Sequence each LED color
12
www.honeywell.com/limitless
Condition
No device paired to output
Output off (set-up mode allows indication to be reversed)
Output on (set-up mode allows indication to be reversed)
Lost RF link
Low battery
Condition (RF Signal switch position 1-9, A-E)
No device paired to output
Output off & RF signal strength LEDs
Output on & RF signal strength LEDs
Lost RF link
Low battery
LED test mode
Condition
Acceptable voltage(s)
Low voltage(s)
LED test mode
Issue 1,
indicated for chosen output
indicated for chosen output
50063987
Hide quick links:
Advertisement
Table of Contents
