NEC Univerge SV8100 Programming Manual page 601

UNIVERGE SV8100
Input Data
Item
No.
07
08
09
Programming Manual
Item
Recording Conversation Beep
(Rec Conv Beep)
Use this option to enable or disable the
Conversation Record beep. If enabled, all parties on
a call hear the voice prompt "Recording", followed by
a single beep when the extension user initiates
Conversation Record. If disabled, the voice prompt
and beep do not occur. When you disable the
Conversation Record beep, the following voice
prompts do not occur while VM8000 InMail records
the conversation:
Recording
(followed by a beep)
That mailbox is full
(if the mailbox message storage capacity is reached)
You have reached the recording limit
(if the recorded message is too long)
The UNIVERGE SV8100 telephone system software
provides an additional Conversation Record beep.
This beep repeats according to the setting of
Program 45-01-06: Voice Mail Integration
Options: Record Alert Tone Interval Time
(0~64800 seconds). To disable the UNIVERGE
SV8100 telephone system Conversation Record
beep, enter 0 for this option.
Message Waiting Lamp
(Update MW Lamp)
Use this option to enable or disable Message
Waiting lamping at the extension associated with the
Subscriber mailbox. For Subscriber Mailboxes, you
should leave this option enabled. For Guest
Mailboxes, you should leave this option disabled.
Auto Attendant Direct to Voice Mail
(Auto-ATT DND)
Use this option to enable or disable Auto Attendant
Do Not Disturb. When a subscriber enables Auto
Attendant Do Not Disturb, an Automated Attendant
caller routes directly to the mailbox, hears the
greeting, and is asked to leave a message. A
subscriber can also enable Auto Attendant Do Not
Disturb while recording their mailbox greeting.
Input Data
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
Issue 10.1
Default
1
1
0
2 - 565