NEC SV8100 Migration Manual

NEC SV8100
InMail User Guide
Your new Voice Mail System is operated using the 4 softkeys under your display.
Your Mailbox Number is the same as your telephone extension number.
Start by Logging into Your Mailbox
Press "VMsg" softkey
To listen to your messages:
1. Push Lstn softkey:
2. While listening to your message, you can do one of the following:
– Dial RE (73) to record a reply for the message sender.
– Dial MF (63) to forward the message to a co-worker.
– Dial MC (62) to make a return call to the message sender.
– Dial TI (84) to hear the time and date the message was sent.
– Dial SA (72) to save the message in your mailbox.
– Push Erase to erase the message.
– Push Next to listen to the next message.
– Dial B (2) to back the message up a few seconds,
or G (4) to go ahead a few seconds.
– Push Rpt to repeat the message from the beginning.
– Dial * to pause and resume listening.
– Push Exit to exit the message listen mode.
To record a greeting for your mailbox:
1. Push Greet softkey.
2. Push Gr1, Gr2 or Gr3 to select which of the three available greetings
you want to be active.
3. Do one of the following:
– Push Lstn to listen to your greeting (if recorded).
– Push Rec to record a new greeting.
– Push Erase to delete your greeting (and use the built-in prerecorded
greeting).
– Push Exit to exit without changing your greeting.
To record a name for your mailbox:
1. Dial RN (76).
2. Do one of the following:
– Push Lstn to listen to your name (if recorded).
– Push Rec to record a new name.
– Push Erase to erase your name (and use your extension number instead).
– Push Exit to exit without changing your name.
To enter a security code for your mailbox:
2. Dial OP (67) and push CODE.
3. Do one of the following:
– Enter a new security and push OK.
– Push Erase to erase your security code.
– Push Exit to exit without changing your security code.
All manuals and user guides at all-guides.com
NEC SV8100
MIGRATION USER GUIDE
541-686-1654